Extang Xceed Hard Tonneau Cover Installation - 2013 Dodge Ram Pickup- Video
Adam: Hi, guys. Adam with etrailer.com. Today we're going to be taking a look at the Extang Xceed Fold-Up Tonneau Cover on our 2013 Ram 2500.So, walking up to my truck, I can hardly really tell it's there. It doesn't sit too tall, but it definitely goes with the black theme of the truck, and I'm definitely, definitely happy with it. So let's just go ahead and take a trip down the road and see how it goes.I've had multiple tonneau covers on my trucks. This one was a no-drill install, which was nice, and you got to remember you go to be happy with the look of it too. more
8/21/2019 3:54:09 PM
BAK BAKFlip F1 Hard Tonneau Cover Installation - 2011 Dodge Ram Pickup- Video
Today on our 2011 Dodge Ram pickup well be installing the Bakflip F1 hard tonneau cover, part number BAK72207RB. Lets go ahead and go over the operation of our new tonneau cover. Well simply open the tailgate and release the tonneau cover locking cable. Each section has a set of locks and cable so well release each one as we fold it up. Then well fold it up to the cab and install the rods to secure it. Rotate it up underneath the rod lock, loosen the hand knob, shift the slide down onto the rod and then tighten down the knob. more
5/20/2014 10:58:21 AM
BAK RollBAK G2 Hard Tonneau Cover Installation - 2003 Dodge Ram Pickup- Video
Speaker: Today on our 2003 Dodge Ram pick-up, we'll be installing the Bak G2 Hard Tonneau Cover Part #BAKR15204. Our first step of this install is going to be mounting the aluminum hanger brackets with the self-tapping screws provided. When we install them we'll have them tight to the bulk head of the pick-up bed. Once we have them in position we'll go ahead and use our self-tapping screws to secure them. Next we'll need to install the canister that houses the roll-up cover. It'll sit on the top of the aluminum brackets we've just installed, keeping the back edge of the bracket even with the back edge of the canister. Then we'll take a self-tapping screw, go down through the pre-drilled hole down in the canister bracket down into the aluminum bracket we installed on our bed side. We'll go ahead and put our rail up into position with the tailgate closed. more
4/10/2014 2:23:26 PM
Bestop EZ Fold Folding Tonneau Cover Installation - 2009 Dodge Ram- Video
Today, on our 2009 Dodge Ram Pickup 2500, we'll be installing the Bestop EZFolding Tonneau Cover, part number B1623901.Now, with our tonneau cover ready to be installed, we'll first remove the sealprotection, which is the white stripping along the outer edge. Now, with that removed,we'll go ahead and set the tonneau cover in position. When setting it in position, we'llalign the long edge with the front rail nearest the cab, and the short edges will line upwith the side rails that extend to the rear. And then we'll go ahead and get underneaththe tonneau cover, rotate the clamp down, and slide it over to the side rail. Then we'llrotate it until we pick up any extra slack and lock it into the inner lip of the bed rail.Now we'll go ahead and repeat the same process on the opposite side.Now, with both front clamps secured, we'll go ahead and fold the cover out. Onceagain, we'll go ahead and repeat the same procedure of pulling the clamps down,sliding them out into the bedrail, rotating them until we take up any extra slack, andthen locking them into position. more
11/29/2012 3:09:02 PM
TruXedo TruXport Tonneau Cover Installation - 2004 Dodge Dakota- Video
Today on our 2004 Dodge Dakota, we'll be installing part number TX262101 the truck's port tonneau cover from Truxedo. We'll take the two siderails and we'll need to apply the weather seal here on the corner plug, here at the front corner. After doing that, we'll set them in the place on the bedside, where we can then attach our front cover assembly. You wanna make sure that the corner plug slides into the cover assembly like so. We'll now put the clamps loosely over our rail. You'll notice the clamps have teeth. more
9/7/2012 12:23:18 PM
Craftec Vinyl Tonneau Cover for Short-Bed Pickups Review- Video
Today we are going to install part number 352730SC from Craftec. What this is, is a vinyl tonneau cover, and we are going to install this on a 2007 Dodge Dakota short-bed pickup. There are a lot of components to this install, but it is not too bad if you break it down into simple little sub-assemblies, as the instructions describe. We will cover some of the parts first to give you an idea of what is going on. First off, we have got these corner pieces here. These corner pieces cover the actual metal corners on the tonneau cover frame itself. We have hardware that threads into the aluminum pieces that actually make their own threads as they go in. We have our latch assemblies right here these work inside the tonneau cover. When you close it and you twist it, it catches underneath the edge of the bed itself. A pull strap to pull it down when the cover is above your head. And these are the clamps that go into the frame and on the bed that your gas shocks mount into. And these are attaching points that go into the track into the frame. You have got the bows to go into that create the bow effect on your tonneau cover, and the the bows are located right here. These are the rails themselves. These are the parts that go longways on the truck, and this part and this part are the ones that go across the truck. Some bed lengths require an extension. In this situation, the bed is so short you do not even have to worry about that. These are the metal corner pieces right here that actually get the frame bolted together and locked into place. And these little angle brackets here will eventually hold the hinge part of the tonneau cover, and also one-half of that will get clamped into place onto the bed itself. Lastly, we have the tonneau cover itself. One good tip about this is if you keep it warm overnight so it stays nice and pliable, that makes it a lot easier to work with. more
3/23/2009 10:23:54 AM
Filter Videos
Filter Videos
